dmesg - Intel Pentium III - AMD 3D Rage IIC PCI - Dell
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-34-generic (buildd@lcy01-36) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #39-Ubuntu SMP Thu Mar 10 22:11:49 UTC 2016 (Ubuntu 4.2.0-34.39-generic 4.2.8-ckt4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007fffdfff] usable
BIOS-e820: [mem 0x000000007fffe000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection missing in CPU!
SMBIOS 2.3 present.
DMI: Dell Computer Corporation PowerEdge 2400 , BIOS A06 10/10/2000
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7fffe max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: PAT not supported by CPU.
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [c00fe710]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x021fffff]
Base memory trampoline at [c009a000] 9a000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x20000000-0x377fffff]
[mem 0x20000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01ce2000, 0x01ce2fff] PGTABLE
BRK [0x01ce3000, 0x01ce3fff] PGTABLE
RAMDISK: [mem 0x34904000-0x36479fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FDCD0 000014 (v00 DELL )
ACPI: RSDT 0x00000000000FDCE4 00002C (v01 DELL PE2400 00000001 MSFT 0100000A)
ACPI: FACP 0x00000000000FDD10 000074 (v01 DELL PE2400 00000001 MSFT 0100000A)
ACPI: DSDT 0x00000000FFFF4800 0026F3 (v01 DELL PE2400 00000001 MSFT 0100000A)
ACPI: FACS 0x000000007FFFE000 000040
ACPI: APIC 0x00000000000FDD84 000060 (v01 DELL PE2400 00000001 MSFT 0100000A)
ACPI: Local APIC address 0xfee00000
1156MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
Normal [mem 0x0000000001000000-0x0000000037bfdfff]
HighMem [mem 0x0000000037bfe000-0x000000007fffdfff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000007fffdfff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007fffdfff]
On node 0 totalpages: 524189
DMA zone: 40 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3999 pages, LIFO batch:0
Normal zone: 2190 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 295936 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15
IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x80000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 19 pages/cpu @f67b1000 s47116 r0 d30708 u77824
pcpu-alloc: s47116 r0 d30708 u77824 alloc=19*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 521959
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (00037bfe:0007fffe)
Initializing Movable for node 0 (00000000:00000000)
Memory: 2033768K/2096756K available (7586K kernel code, 743K rwdata, 3024K rodata, 928K init, 796K bss, 62988K reserved, 0K cma-reserved, 1183744K highmem)
virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1b1a000 - 0xc1c02000 ( 928 kB)
.data : 0xc1768e30 - 0xc1b18d80 (3775 kB)
.text : 0xc1000000 - 0xc1768e30 (7587 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f4436000 soft=f4438000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 993.358 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 1986.71 BogoMIPS (lpj=3973432)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
mce: CPU supports 5 MCE banks
Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
Freeing SMP alternatives memory: 28K (c1c02000 - c1c09000)
ftrace: allocating 30247 entries in 60 pages
Enabling APIC mode: Flat. Using 2 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 0) ...
....... works.
smpboot: CPU0: Intel Pentium III (Coppermine) (fam: 06, model: 08, stepping: 06)
Performance Events: p6 PMU driver.
... version: 0
... bit width: 32
... generic registers: 2
... value mask: 00000000ffffffff
... max period: 000000007fffffff
... fixed-purpose events: 0
... event mask: 0000000000000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f453e000 soft=f4548000
x86: Booting SMP configuration:
.... node #0, CPUs: #1
Initializing CPU#1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (3973.47 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
reboot: Dell PowerEdge 2400 series board detected. Selecting BIOS-method for reboots.
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 5:45:50, date: 03/29/16
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: PCI BIOS revision 2.10 entry at 0xfc7de, last bus=2
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150619/hwxface-580)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-01])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-01]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0fff window]
pci_bus 0000:00: root bus resource [io 0xe000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfe10ffff window]
pci 0000:00:00.0: [1166:0009] type 00 class 0x060000
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
pci 0000:00:00.1: [1166:0009] type 00 class 0x060000
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
pci 0000:00:02.0: [8086:0962] type 01 class 0x060400
pci 0000:00:02.1: [1028:0001] type 00 class 0x010400
pci 0000:00:02.1: reg 0x10: [mem 0xf4000000-0xf7ffffff pref]
pci 0000:00:02.1: reg 0x30: [mem 0xfb000000-0xfb00ffff pref]
pci 0000:00:08.0: [8086:1229] type 00 class 0x020000
pci 0000:00:08.0: reg 0x10: [mem 0xfe101000-0xfe101fff]
pci 0000:00:08.0: reg 0x14: [io 0xecc0-0xecff]
pci 0000:00:08.0: reg 0x18: [mem 0xfe000000-0xfe0fffff]
pci 0000:00:08.0: reg 0x30: [mem 0xfb000000-0xfb0fffff pref]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: [1002:4759] type 00 class 0x030000
pci 0000:00:0e.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref]
pci 0000:00:0e.0: reg 0x14: [io 0xe800-0xe8ff]
pci 0000:00:0e.0: reg 0x18: [mem 0xfe100000-0xfe100fff]
pci 0000:00:0e.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:0f.0: [1166:0200] type 00 class 0x060100
pci 0000:01:06.0: [9004:8078] type 00 class 0x010000
pci 0000:01:06.0: reg 0x10: [io 0xfc00-0xfcff]
pci 0000:01:06.0: reg 0x14: [mem 0xfcfff000-0xfcffffff]
pci 0000:01:06.0: reg 0x30: [mem 0xfd000000-0xfd00ffff pref]
pci 0000:01:06.0: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xf000-0xffff]
pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfaffffff pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 02-ff])
acpi PNP0A03:01: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:01: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:01: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:02
pci_bus 0000:02: root bus resource [bus 02-ff]
pci_bus 0000:02: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKI] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKJ] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKK] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKL] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKM] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKN] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKO] (IRQs 3 4 5 6 7 9 *10 11 12 14)
ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 9 10 11 12 *14)
ACPI: PCI Interrupt Link [LUSB] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
vgaarb: setting as boot device: PCI:0000:00:0e.0
vgaarb: device added: PCI:0000:00:0e.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:0e.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 32 bytes
e820: reserve RAM buffer [mem 0x7fffe000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
clocksource: Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: [dma 2]
pnp 00:00: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x0814-0x085b] has been reserved
system 00:07: [io 0x0580-0x058f] has been reserved
system 00:07: [io 0x0c00-0x0cd7] has been reserved
system 00:07: [io 0x0f50-0x0f58] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x00100000-0x00ffffff] could not be reserved
system 00:08: [mem 0x01000000-0x7fffffff] could not be reserved
system 00:08: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:08: [mem 0xfec00000-0xfec0ffff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:08: [mem 0xffe00000-0xffffffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
PnPBIOS: Disabled by ACPI PNP
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
clocksource: Switched to clocksource acpi_pm
pci 0000:00:08.0: can't claim BAR 6 [mem 0xfb000000-0xfb0fffff pref]: address conflict with 0000:00:02.1 [mem 0xfb000000-0xfb00ffff pref]
pci 0000:00:08.0: BAR 6: assigned [mem 0xf8000000-0xf80fffff pref]
pci 0000:00:0e.0: BAR 6: assigned [mem 0xf8100000-0xf811ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xf000-0xffff]
pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfaffffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [io 0x03e0-0x0fff window]
pci_bus 0000:00: resource 8 [io 0xe000-0xffff window]
pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000effff window]
pci_bus 0000:00: resource 10 [mem 0xf4000000-0xfe10ffff window]
pci_bus 0000:01: resource 0 [io 0xf000-0xffff]
pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfdffffff]
pci_bus 0000:01: resource 2 [mem 0xfa000000-0xfaffffff pref]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
PCI: CLS mismatch (32 != 64), using 32 bytes
pci 0000:00:08.0: Firmware left e100 interrupts enabled; disabling
pci 0000:00:0e.0: Video device with shadowed ROM
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28120K (f4904000 - f647a000)
microcode: CPU0 sig=0x686, pf=0x1, revision=0x7
microcode: CPU1 sig=0x686, pf=0x1, revision=0x7
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 512 (order: 3, 32768 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1459230352.311:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x1024x24, linelength=3840, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xf9000000, mapped to 0xf8600000, using 3840k, total 3840k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 8
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one day, y3k, 242 bytes nvram
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: b58c76dfcd72d8033ec931d47dbbb0dd3bd3fbe9'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 8:923:770
rtc_cmos 00:06: setting system clock to 2016-03-29 05:45:53 UTC (1459230353)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
isapnp: No Plug & Play device found
Freeing unused kernel memory: 928K (c1b1a000 - c1c02000)
Write protecting the kernel text: 7588k
Write protecting the kernel read-only data: 3032k
random: systemd-udevd urandom read with 0 bits of entropy available
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
agpgart-serverworks 0000:00:00.0: can't determine aperture size
agpgart-serverworks 0000:00:00.0: agp_backend_initialize() failed
agpgart-serverworks: probe of 0000:00:00.0 failed with error -22
agpgart-serverworks 0000:00:00.1: can't determine aperture size
agpgart-serverworks 0000:00:00.1: agp_backend_initialize() failed
agpgart-serverworks: probe of 0000:00:00.1 failed with error -22
Adaptec aacraid driver 1.2-1[40709]-ms
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
AAC0: kernel 2.5-0[2991]
AAC0: monitor 2.5-0[2991]
AAC0: bios 2.5-0[2991]
AAC0: serial 4B4001D0
scsi host0: percraid
scsi 0:0:0:0: Direct-Access DELL PERC Stripe V1.0 PQ: 0 ANSI: 2
e100 0000:00:08.0 eth0: addr 0xfe101000, irq 18, MAC addr 00:b0:d0:d0:6f:4f
e100 0000:00:08.0 enp0s8: renamed from eth0
tsc: Refined TSC clocksource calibration: 993.323 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1ca2e73ccc3, max_idle_ns: 881590499356 ns
clocksource: Switched to clocksource tsc
scsi 0:1:5:0: Direct-Access FUJITSU MAP3367NC 5605 PQ: 0 ANSI: 3
scsi 0:1:6:0: Processor DELL 1x6 U2W SCSI BP 5.35 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 71091456 512-byte logical blocks: (36.3 GB/33.8 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 12 00 00 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
scsi 0:1:5:0: Attached scsi generic sg1 type 0
scsi 0:1:6:0: Attached scsi generic sg2 type 3
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI removable disk
scsi host1: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs
scsi 1:0:5:0: CD-ROM NEC CD-ROM DRIVE:466 1.06 PQ: 0 ANSI: 2
scsi target1:0:5: Beginning Domain Validation
scsi target1:0:5: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15)
scsi target1:0:5: Domain Validation skipping write tests
scsi target1:0:5: Ending Domain Validation
sr 1:0:5:0: [sr0] scsi3-mmc drive: 17x/40x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:5:0: Attached scsi CD-ROM sr0
sr 1:0:5:0: Attached scsi generic sg3 type 5
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Failed to insert module 'kdbus': Function not implemented
random: nonblocking pool is initialized
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86.
systemd[1]: Set hostname to .
systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Created slice User and Session Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Journal Service.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[205]: Received request to flush runtime journal from PID 1
ifquery[286]: segfault at 1 ip 0804aba2 sp bfcf6510 error 4 in ifup[8048000+e000]
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
piix4_smbus 0000:00:0f.0: SMBus Host Controller at 0x580, revision 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ifquery[359]: segfault at 1 ip 0804aba2 sp bfec2d80 error 4 in ifup[8048000+e000]
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ppdev: user-space parallel port driver
ifquery[404]: segfault at 1 ip 0804aba2 sp bf9059f0 error 4 in ifup[8048000+e000]
Adding 2096124k swap on /dev/sda5. Priority:-1 extents:1 across:2096124k FS
ifquery[407]: segfault at 1 ip 0804aba2 sp bfe9eb70 error 4 in ifup[8048000+e000]
audit: type=1400 audit(1459230369.619:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=399 comm="apparmor_parser"
audit: type=1400 audit(1459230369.619:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=399 comm="apparmor_parser"
audit: type=1400 audit(1459230369.619:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=399 comm="apparmor_parser"
audit: type=1400 audit(1459230369.619:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=399 comm="apparmor_parser"
audit: type=1400 audit(1459230369.727:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=399 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): enp0s8: link is not ready
e100 0000:00:08.0 enp0s8: NIC Link is Up 100 Mbps Full Duplex
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s8: link becomes ready
perf interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000